A

ANALYZERS - FLUE GAS / NETWORK / AUTOMOTIVE / ENGINE / SPECTRUM /

ANEMOMETERS - TRANSMITTER & ADAPTOR /

ASSEMBLY TERMINAL BLOCK / ALCOHOL TESTERS / ALTI METER

 

ANALYZERS

 - 712 FLUE GAS ANALYSER and TPI-A740 INFRARED PRINTER

 

Instruments :

Fuels : Natural Gas, LPG, Light Oil, Heavy Oil & User Defined

Pressure Ranges : mbar, kPa & in H2O. Data Storage : 10 sets of readings

Data Logging : 400 sets of readings on ‘Timed Interval Logging’

Time & Date : 24 Hour Real Time Clock

 

Flue Temperature Probe :

Construction : Pistol Grip with Stainless Steel Shaft

Hose Length :  2500mm Insertion Length : 200mm

‘K’ Type Thermocouple Accuracy : +0.3% fsd, +1Oc

 

Pressure Measurement :

Selectable Ranges : mbar, kPa & inH2O

TPI-712

TPI-A740

Range : -150 mbar ~ + 150mbar

Resolution : 0.01 mbar

Accuracy : +0.5% fsd

 

TPI-A740 Infrared Printer :

• Self test at Power ON

• Adjustable contrast (low, norm, high)

• Manual paper feed (advance) • Power On indication (Red LED) • Operates on 4 “AA” batteries or optional AC adapter

Gases :

Range   

Resolution

Accuracy
Oxygen

0-25%

0.1%

+0.3%

Carbon Monoxide

0-10,000 ppm

1 ppm

<20 ppm : +3 ppm

>100 ppm : +5%

Carbon Dioxide (Calculated)

0-25%

0.1%

+0.3%

CO/CO2 Ratio (Calculated)

0-0.999

--

--

Combusion Efficiency

0-100%

0.1%

--

Gas Leak Sensor

100-10,000 ppm

--

--

 1826-NA NETWORK ANALYZER

 

Measure Earth Reasistance without the need for poles I the ground or external measuring wires. Earth Measurement uses the real earth current path and the current generated by the electric network, without the need for any disconnection. The Earth Resistance displayed is exactly the earth resistance that the earth current will need to go through if an earth fault occurs. Displays voltage supply at the transformer (Line to Neutral). without loading the transformer.

TECHNICAL SPECIFICATION

TYPICAL ACCURACY

Loop Impedance Range L-E, L-N

0.03-2000V (Software Ctrl)

Loop Impedance

4% of FS + 2 dgt

Voltage Measurement L-N, L-E

50 to 280V AC (Sine)

PSC Current

10% of FS + 5 dgt

PSC current (L-N) max.

6KA @ 230V AC supply

Voltage

2% of FS + 1 dgt

PSC current (L-E) max.

6KA @ 230V AC supply

Operating / Temperature

-10oC to + 40oc /

Operating Voltage

230V +50% @ 50Hz Sine

Operating Humidity

80% max relative humidity

Dimensions (LxWxD)

(170 x 165 x 92)mm

 

 

Power Source     

6 x AA Batteries

 

 

WENS-9230 DIGITAL AUTOMOTIVE ENGINE ANALYZER

 

Measuring Range TACH (x10rpm), DWELL (Duty Cycle), DC Voltage : 200mV, 2V, 20V, 200V, Resistnance : 20-200-2K-20K-200K-2K ohms, Diode  Check, AC Voltage 750V, DC Current 2A, 20A with data hold, AP 10 inductive pick-up, for Automotive Meter’s RPM measurement.

 516 DIGITAL AUTOMOTIVE ANALYZER

 

Bi directional RS232C serial interface cable for DOS or WINDOWS software for computer. Accurate reading of DWELL without using duty cycle to Dwell conversion chart when testing electronic fuel injection. RPM measurement for automotive engins with 1 to 12 cylender with inductive pickup or test leads. Ms-Pulse / Duty cycle measure easily. Max / Min record over 24 hrs. Backlight allows reading in dark.

Measuring  Range  - Voltage : 1000 V DC / 750 V AC, Curent 10 Amps DC / AC, Resistance 40MW. Temeprature   -40°C~1370°C, Capacitance Range mF to 1000mF.

HC-7802 HUNG CHANG SPECTRUM ANALYZER (1GHz)

 

Measuring Peak Level Of TV Signal, Frequency Range : 1MHz~1000MHz, Cal. Out : 100MHz 80dB Micro ±0.5dB Micro, Direct Read of Spectral Level Form Attenuation Range CRT, Easy Reading of Center Frequency from CRT Read Out Display, Input Impedance : 500W (75W Optional) Less than 1.5,  Dynamic Range : 60/70dB, Scanning Time : 5ms/Div, Switchable wide Bandwidth.
ANEMOMETERS & ACCESSORIES

 AZ-8904 THERMO ANEMOMETER

 

Simultaneus Display Air Velocity and Temperature Measurement Range Airflow 80-4900 ft / min, 0.4-30 m / sec. Temperature -10-+50°C, +14-122°F with max. / min. / Average memory with Data hold function / Temperature Sensor. Battery Type and Life : 9 Volt./100 hours (under normal usage). Display Type and Size : LCD 37mmx42mm (11/4” x 15/8”). Max Reading : 9999. Diameter of Fan : 70mm (27/8”) with Auto Power Off 20 minutes. Selectable Knot, Mile/H, KM/H.

 AM-4201 ANEMOMETER

 

3½ digit LCD display (8mm) Portable, Fast High Accurate Readability Measurement Range : 0.4-30.0 m/s, 1.4-108 Km/h, 80-5910 f /min, 0.8-58.3Knots with Data hold function.

 AM-4202 ANEMOMETER

 

Same As Above but Temperature Range : 0oC~60oC / 32oF~140oF. Resolution : 0.1oC / oF.
Accuracy : 0.8oC / 1.5oF. (Optional SPARE FAN (VANE) for Anemometer AM-4201 / AM-4202).

 AM-4206 ANEMOMETER with AIR VELOCITY / AIR FLOW and Data Output RS-232 Serial Interface.

Air Velocity

Measurement

Range

Resolution

Accuracy

Measurement

Range

Resolution

Accuracy

m/s

0.4-25.00 m/s

0.01 m/s

+(2%+0.2m/s)
Km/h

1.4-90.0km/h

0.1 km/h

+(2%+0.2km/h)

mile/h

0.9-55.9 mile/h

0.1 mile/h

+(2%+0.2mile/h)

Knots

0.8-48.6 knots

0.1 knots

+(2%+0.2knots)

 Ft/min

80-4921 ft/min

1 ft/min

+(2%+0.2ft/min)

 

Air Flow

Air Temperature
Measurement

Range

Resolution

Area

Measuring Range

Resolution

Accuracy

CMM (m3/min)

0-999.900 m3/min

0.001-100

0.001-9,999 m3/min

0oC ~ 50oC

30oF ~ 122oF

0.1oC

0.1oF

0.8oF

1.5oF

CFM (ft3/min)

0-999.900 ft3/min

0.001-100

0.001-9,999 ft3/min

 AM-4206M ANEMOMETER with AIR VELOCITY / AIR FLOW and Data Output

RS-232 Serial Interface.

 

All same as AM-4206 but with Metal Vane Probe, Heavy Duty.

 YK-80AM METAL VANE ANEMOMETER.

 

Microprocessor circuit assures maximum possible accuracy, provides special functions and features. Large LCD with Dual function meter’s display. Metal vane, heavy duty and wide range air flow measurement. Records Maximum and Minimum reading with RECALL. Data Hold. Auto Power OFF. RS-232 Serial Interface.

Measurement

Range

Resolution

Accuracy

Measurement

Range

Resolution

Accuracy

Temp. (oC)

0oC~80o

0.1oC

+0.8oC(<60oC)

Temp. (oF)

32oF~176oF

0.1oF

+1.5oF(<140oF)

m / s

0.8~40.0 m/s

0.1 m/s

+ (2% + 2d)

km / h

2.8~144.0km/h

0.1k m/h

+ (2% + 2d)

ft / min

160~4930 ft/min

1 ft/min

+(2% + 20ft/min)

Knots

1.6~78.1 knots

0.1 knots

+ (2% + 2d)

mile / h

1.8~89.4mile/h

0.1 mile/h

+ (2% + 2d)

 

 

 

 

AM-4213 MINI VANE ANEMOMETER.

 

Exclusive one-chip of microcomputer LSI circuit. 13mm (0.5”) Super Lace LCD Dual Display. Sensor Structure : Air Velocity - Conventional twisted van arm and low friction ball bearing design. Temperature - Thermistor. Data Output : RS-232.

 

Air Velocity

Measurement

Range

Resolution

Accuracy

Measurement

Range

Resolution

Accuracy

m / s

0.8 ~ 12.00 m/s

0.01 m/s

+(2% + 0.2 m/sec)

km / h

32oF ~ 176oF

0.1oF

+1.5oF (<140oF)

mile / h

1.8 ~ 26.8 mile/h

0.1 mile/h

+(2% + 0.2 mile/h)

knots

2.8 ~ 144.0 km/h

0.1k m/h

+ (2% + 2d)

ft / min

160 ~ 2358 ft/min

1 ft/min

+(2% + 0.2 ft/min)

 

 

 

 

Air Temperature

Temp. (oC)

0oC ~ 80oC

0.1oC

+0.8oC

Temp. (oF)

32oF ~ 175oF

0.1oF

1.5oF

HATCO AM-4812 DIGITAL ANEMOMETER.

 • 4 Digits LCD display.

• Low friction ball-bearing and carefully balanced vane results in accurate velocity measurement.

• 4 display mode : m/s. km/h, ft/min. knots.

• Data hold for easy reading.

• Ideal for use in checking air conditioning and heating systems, measuring air velocity, wind speed.

Technical Specification : Air velocity : 0.4~30.0 m/s, +2%+1d. 1.4~108.0 km/h, +2%+3d. 80~5910 ft/min, +2%+2d. 0.8~58. 9 Knots, +2%+2d. Resolution : 0.1 m/s, kn/h, knots or 1 ft/min. Battery : 1.5V x 4.

 

HATCO AM-4822 DIGITAL ANEMOMETER.

 All same as AM-4812 but with Built-in temperature oC / oF measurement.

Temperature : 0 ~ 60oC, +0.5oC (32 ~ 140oF, +0.9oF). Resolution : 0.1oC / 0.1oF.

AM-4812

AM-4822

AVM-01

AVM-03

AVM-05

AVM-07

PROVA AVM-01 ANEMOMETER.

 

3½ digit LCD Dispaly.  Sensitive of Low / High Air Velocity. Ergonmic Design. Detached 52mm (diameter) Vane Head.

Power Source : 9V Battery.

Measurement

Range

Resolution

Accuracy

Measurement

Range

Resolution

Accuracy

m / s

0-45.0

0.1

+3% or 0.1

km / h

1-140.0

0.1

+3% or 0.1

ft / min

0-8800

10

+3% or 10

Knots

0-88.0

0.1

+3% or 0.1

mile / h (Optional)

0-100.0

0.1

+3% or 0.1

 

 

 

 

PROVA AVM-03 ANEMOMETER.

 

All same as AVM-01 but with Temperature : 0 ~ 60oC (32 ~ 140oF) Resolution : 0.1 Accuracy : +0.8 (+1.5).

PROVA AVM-05 FLOW ANEMOMETER.

 

LCD Dual Display. • Flow (CFM, CMM) • Instant / Ave / 2 / 3 / Vmax Flow Measurement • Velocity m/s, ft/min, knots, km/hr, mph

• Max / Min Hold.

Air Velocity

Measurement

Range

Resolution

Accuracy

Measurement

Range

Resolution

Accuracy

m / s

0.4-25.00 m/s

0.01 m/s

+(2%+0.2m/s)

km / h

1.4-90.0 km/h

0.1 km/h

+(2%+0.2km/h)

mile/h

0.9-55.9mile/h

0.1 mile/h

+(2%+0.2mile/h)

Knots

0.8-48.6knots

0.1 knots

+(2%+0.2knots)

ft / min

80-4921ft/min

1 ft/min

+(2%+0.2ft/min)

 

 

 

 

Air Flow

Air Temperature

Measurement

Range

Resolution

Accuracy

Measurement Range

Resolution

Accuracy

CMM (m3/min)

0-999, 900m3/min

0.001 - 100

0.001-9, 999m3/min

0oC to 50oC

0.1oC

0.8oF

CFM (ft3/min)

0-999, 900ft3/min

0.001 - 100

0.001-9, 999ft3/min

30oF to 122oF

0.1oF

1.5oF

PROVA AVM-07 FLOW ANEMOMETER.

 

All same as AVM-05 but with RS-232 & Momory of 2,000 Records.

 AM-4204 HOT WIRE THERMAL ANEMOMETER.

 

For very low air velocity measurement with telescopic probe. Display : Super large  13mm (0.5”) LCD with dual function meter’s display, read the air Velocity and Temperatire. Build in temperature Thermistor sensor for oC, oF measurement for Precision fast response. Applications : Environmental Testing, Air conveyors, Flow hoods, Clean rooms, Air veloc ity, Air balancing, Fans motors/ blowers, Furnace velocity, Refrigerated case, Paint spray booths. Circuit : Custom one-chip of micro-processor LSI circuit. Memory : Maximum and Minimum with recall and Data hold. Auto Power shut off.
Sampling Time : Approx. 0.8 sec. Measurement in m/s, km/h, ft/min, mile/h, knots. Temp. 0~50oC, 32~122oF. Range 0.2-20m/s, 0.7 72.0 km/h, 40-3940 ft/min, 0.5~44. 7mile/h, 0.4 38.8knots.
Accuracy : +1% + 1dgt of full scale.

 - 565 HOTWIRE AIR VELOCITY METER.

 

Dual digits LCD with function annunciation. Measurement - Air Velocity : m/s, km/hr, ft/min, knots, mile/s. Temperature : oC, oF. Measurement Range - Air Velocity : 0.2~20 m/s. (*Sensor : Glass bead Thermistor). Temperature : -5oF~175oF (-20oC~80oC). Powering : 1.5V x 6 (AAA TYpe) Alkaline Battery.

Measurement

Range

Resolution

Accuracy

Measurement

Range

Resolution

Accuracy

m / s

0.2~20.0

0.1

+5%

of reading

+3dgt

ft / min

40~3940

1

 

km / h

0.7~72.0

0.1

Temperature

-20oC~80oC

 0.1

+1% of reading +0.5oC +3 digit

mile / h

0.5~44.7

0.1

-5oF~175oC

+1% of reading +1.0oC +3 digit

knots

0.4~38.8

0.1

 

 

 

 

 - 575 VANE AND HOT WIRE VELOCITY METER.

 

Dual digits LCD with function annunciation. Data Hold, Auto Power Off, Data record function for Max and Min. Temperature and Air Velocity reading. Measurement : m/s, km/s, ft/min,

knots, mile/h, oC, oF. Measurement Range And Accuracy : Air Flow (Vane) - 0.4 ~ 25m/s (+2% of reading +3 digits). Hot Wire : 0.2 ~ 20 m/s (+5% of reading +3 digits). Temperature : -20oC~ 80oC (+1% of reading +0.5oC +3digit), -5oC ~ 175oF (+1% of reading +1.0oF +3 digit).

 TR-AMT1A4 ANEMOMETER TRANSMITTER.

 

Measure Range : 0.4 ~ 30m/s Output : 4~20mA (0m/s=4mA, 0.4m/s=4.21mA, 10m/s=9.33mA, 30m/s=20mA). External Adjustment : Zero VR & Span VR. Power Supply : 90 ~ 260ACV 50 ~ 60Hz. Operation Temp. : 0 ~ 50oC (32~122oF). Mounting : Din Rail or Wall. Body : ABS Plastic.

 AM-402 ANEMOMETER ADAPTER.

 

To cooperate with DMM 200mV range be used as an Anemometer to check air conditioning & heating systems, measure air velocities, wind speeds etc. Measure Range : 0.4~30.0 m/s, 1.4~108.0 km/h,
80 ~ 5910 ft/min, 0.8 ~ 58.3 knots. Output : m/s - 1mV per 1m/s, km/h - 1mV per 1km/h, ft/min - 1mV per 100ft/min, knots - 1mV per 1knots. Accuracy (25m/s) : m/s - +(2% +0.1mV), km/h - +(2% +0.3mV), ft/min - +(2% + 0.2mV), knots - +(2% +0.2mV).  Sensor : Conventional twisted vane arms and low friction ball bearing design. Build in low battery indicator. Operating Temp. : 0~50oC (32~122oF). Operating Humidity : Less than 8%RH.

JZ-712 / JZ-713 STAND

 FOR ANEMOMETER, SOUND LEVEL METER, VIBRATION METER AND INFRARED THERMOMETER.

 

Model

JZ-712

50g

105mm

f10mm

140mm

105mm

0.8kg

JZ-713

30g

105mm

f10mm

140mm

105mm

0.8kg

 
ASSEMBLY TERMINAL BLOCK & ACCESSORIES

Model

HYBT-15

HYBT-15-2

HYBT-25

HYBT-35

HYBT-60

HYBT-100

APPEARANCE

Rated Insulating Voltage

600V

Rated Current

15A

15A (2 Stack)

25A

35A

60A

100A

Insulated Resistance

100MOhms above

Dielectric Strength

AC2500V for 1minute between non-current carrying parts

Terminal Bolt

M3.5

M4

M6

Connecting

Terminal

l (above)

8.0mm Min.

14.0mm Min.

14.5mm Min.

20.5mm Min.

d (above)

f 3.6 Min.

f 4.1 Min.

f 6.1 Min.

W (max)

6.8mm Max.

8.7mm Min.

9.6mm Min.

12.4mm Min.

16.5mm Min.

L (above)

20.0mm Min.

27.0mm Min.

30.0mm Min.

45.0mm Min.

HYBT(02~03)

HYBT(12)

HYBT(07)

HYBT(08)

HYBT(10)

Separator

Separator

Stopper

Cover

Number Plate
ALCOHOL TESTERS

ROAD Test Alcohol Breath Tester.

 

Unique 4 digits LCD display • Build in DSP microprocessor technology.

• Warm up time : less than 20 sec. (typical). • Auto adjust / reset, with reset button

• Illumination button for use in dark (Auto shut off after 10 seconds)

• Power source : 1.5V Alkaline (“AA” size) x 3. and 12 VDC adapter.

• Accuracy : 15% @ 0.01 % BAC • Blowing time : 4 ~ 5 sec. continuously.

• Automatic switch off after 30 sec. • Removable mouthpiece, easy to clean and replace. CE approved.

ABT-168 Alcohol Breath Tester with RS-232 Printer.

 

• Sensor : sintered metal • Warm up time: less then 1 min. (typical)

• Measuring range : 0.000~1.000mg/l BAC (or 0.000~0.200% BAC or 0.000~2.000).

• Recycle time : 30 seconds (typical)

• Power supply : 4* 1.5V” AAA” batteries, 12V AC/DC adaptor (Battery and adaptor not incursive)

• Back light • Display : photo dot matrix LCD • Accuracy : +1/-1 digit

• Mouth-piece : individually wrapped disposable w/moisture trap

• Temperature range : 0°C ~ 45°C.

AT 198 ALCOHOL TESTER.

 

• Advanced NM Hot-wire alcohol sensor. • Quick response, excellent Accuracy. • Smart MCU control.
• Direct Testing process guide. • No touch health design. • Visible and audio warning beyond pre-set limit.
• Low battery indication.

Technical Data : Detection Range : 0.001-1.00mg / L(0.000~0.20%BAC).

Accuracy : +5% at 0.22mg / L(0.05%BAC).

Warm-up Time : <10 sec. (Initial Warm-up : 30 sec).

Testing Time : < 8 sec.

Display : 3 Digit LCD.

Power : 3VDC (2 x AAA batteries).

ALTI METER

SANOH ANALOG ALTI METER 7020 Made in JAPAN

 

For CLIMBING, CAMPING and SAILING with BAROMETER, WEATHER FORECAST, COMPASS, THERMOMETER and MIRROR. Alti Meter Range : 0~5000 Meter. Barometer Range : 700~1000 hPa. Temperature Range : -20~60oC. With Carrying Case.