E

EDUCATION METER / ELCB TESTER / ELECTROMAGNETIC FIELD TESTER / ENCODER ROTARY

 

EDUCATION METER


 

TABLE TOP ANALOG EDUCATION METER

 

J0404 DC Current any Single Range :

(a) 0 to +200 mA DC / +500 mA DC / +750 mA DC

(b) -1 to + 5 Amp (c) -2 to +10 Amp / +25Amp

 

J0405 DC Voltage any Single Range :

(a) -1 to +3 VDC (b) -5 to +15 VDC / +25VDC

 

J0406 AC Current any Single Range :

(a) 0 to 10 mA AC / 100 mA AC / 500 mA AC / 1 A AC /

      3A AC / 5A AC / 10A AC / 15 A AC.

 

J0407 AC Voltage any Single Range :

(a) 0 to 150 V AC / 300 V AC / 500 V AC / 600 V AC

MULTI RANGE EDUCATION METER COVRING DC VOLTS & AMPS

(a) 100mV / 1V / 10V / 50V (b) 100mA / 100mA / 1A / 5A


ELCB TESTER


 KEW-5406 Made in Japan. DIGITAL ELCB (RCD) TESTER

 

Microprocessor Controlled, can test DC sensitive ELCB (RCD) Tester, Direct Digital Readout of ELCB (RCD) Trip Time, 24 Test Current Ranges. Trip Current Settings : 10 / 20 / 30 / 100 / 300 / 500mA, Fault Trip Time : 2000mS.


SEW-1810EL

SEW-2820EL

SEW-2821EL


Model

1810 - EL

Model

2820 - EL & 2821 - EL

Voltage

230V AC + 15%

Trip Current Range

0-1A at 317V (Auto Range Programmable)

Current

Adjustable 10-50mA AC (No battery)

Trip Current Resolution

1mA

Frequency

50 / 60 Hz Automatic

Operating Voltage (L-E)

100-450V

Protection

Fused 200mA, 250V

Phase Angle Setting

0o and 180o selectable

Rating

Intermittent rated

Timer – Max

99.999S

Battery

None

Timer – Resolution

1ms

Test Leads

Alligator Colour Coded

Battery

1.5V (AA) x 8 Batteries

Features

• Two wires aperation / Line – earth

Typical Accuracy

Trip – Current

+ 1% rdg + 1mA

• Meter : Taut Band movement

Trip – Time

+ 1% rdg + 1 dgt

 

 

Voltage

+ 3% rdg + 1 dgt

 

 

Features

• Indicates tripping phase angle.

• Over temperature shut-down.

• Transient protection.


ELECTROMAGNETIC FIELD TESTER


 EMF-822A ELECTROMAGNETIC FIELD TESTER

 

3.½ Digit LCD display. Range : Two Function, Micro Tesla and Mili Gauss : 20 micro Tesla x 0.01 micro Tesla / 200 mili Gauss x 0.1 mili Gauss (*1 Micro Tesla = 10 mili Gauss). Band width : 30Hz~300Hz. No. of Axes : Single Axis. Auuracy : +(4% + 3d) at 50/60Hz. Over Input : Display shows ‘1’. Sampling Time : Approx. 0.4 second. Battery : 9V DC. Power Current : Approx. DC 3mA. Operating Temperature : 0oC~50oC (32oF~122oF). Operating Humidity : <80%RH. Weight : 165g / 0.36LB (Including Battery). Dimenson : 131(H) x 70(W) x 25(D).


 EMF-827 ELECTROMAGNETIC FIELD TESTER with Separate Probe

 

3.½ Digit LCD display. Range : 20 / 200 / 2000 micro Tesla. 200/2000/20000 micro milli-Gauss. Accuracy : (23 + 5oC). Sampling Time : Approx. 0.4 sec. Battery : 9V DC. Power Current : Approx. DC 2mA. Weight : 215g / 0.48LB (Including Battery). Dimension : Instrument : 163 x 68 x 24mm. Probe : 175 x 45 x 22mm. This EMF tester is specifically designed to determine the magnitude of electromagnetic field radiation generated by power lines, computer’s monitor, TV sets, Video machinery and many other similar devices


ROTARY ENCODER


MODEL

HYRE SERIES

HYRE – A –  –  –  N

HYRE – A –  –   – O

HYRE – A - -o-T

HYRE-A-o-o-L

Output Type

NPN Voltage Output

NPN Open Collector Output

Totem Pole Output

Line Driver Output

APPEARANCE

A-200-ABZ

A-500-ABZ

RC-8

Size

f50 Case and f8 Shaft

Resolution

*1 • *2 • *5 • *10 • *15 • 20 • 25 • 30 • 40 • 50 • 60 • 75 • 100 • 120 • 150 • 200 • 240 • 250 • 300 • 360

• 400 • 500 • 512 • 600 • 1000 • 1024 • 1200 • 1500 • 1800 • 2000 • 2048

(Note) * indicates that only A, B phase can output (but for Line Driver Output are only A,`A, B,`B)

Electrical

Specification

Output Type

A phase, B phase, Z phase

A, B, Z,

`A,`B,`Z phase

Phase Difference on Output

Phase difference between A, B phase : T/4 + T/8 (Cycle of A phase = T)

Max Response Frequency

100KHz

Rated Voltage

5~24VDC +10%

5VDC +10%

Current Consumption

Below 60 mA

Connection Method

Pre-wired

Control Output

Load Voltage : below 30V

Load Current : below 30mA

Residual Voltage : below 0.4V

For Low

Load Current : below 30mA

Residual Volt. : below 0.4V

For High

Load Current : below 10mA

Residual Voltage :

above -2.5V of rated volt.

For Low

Load Current : below 20mA

Residual Volt. : below 0.4V

For High

Load Current : below 20mA

Residual Voltage :

above -2.5V of rated volt.

Response Time

Below 1ms

Below 1ms (cable length : 1.5m isink = 30mA)

Below 1ms

(cable length : 1.5m

isink = 10mA)

Below 1ms

(cable length : 1.5m

isink = 30mA)

Mechanical

Specification

Permissible Shaft Loading

Radial : 3kgf, Thrust : 2kgf

Max Permissible Revolution

5000 rpm

Bearing Life

1.2 x 108/rpm : time

Protection

IP 50 (IEC Standard)

Accessory

f8mm coupling, bracket

RC-8 Spare Coupling for above Rotary Encoder.


MODEL

PSC SERIES

PSC-MA

PSC-MB

PSC-MC

APPEARANCE

98(W) x 61(H) x 130(D)

Unit

1m

1cm

1mm

Ratio of Gear

4 : 1

4 : 1

2 : 1

Wheel Girth

250mm

Pulse / Slit

1

100

500

Ratings

Power Voltage

5~24VDC

Ripple

Max. 3%rms

Power Consumption

Max. 60mA

Output

Signal

A phase, B phase Phase Difference 90 + 45o

Duty ratio

50o +25o

Wave

Signal width

50 ~ 150% (Z phase)

High / Low time

3mS Max. (cable 50cm Max.)

Output

TR. output (open collector)

Output Voltage

“H” Power voltage - Min. 2.5V             “L” Max. 0.4V

Load power voltage

30 VDC below

Shaft Alloune Load

Radial : 5kg, Thrush : 3kg

Max. Revolution

5000 rpm