M
|
MANOMETER / MILLIOHM METER /
METERS MOISTURE METER / WEATHER METER / ENVIRONMENT
METER / |
|
Measure Guage /
Differential Pressure. Pressure Range : 0~5psi (8205)
/ 0~15psi (8215)
/ 0~30psi (8230)
/ 0~100psi (82100). Digital Display of gauge or differential pressure.
Select from one of 11 PRESSURE UNITS : bar, mbar, psi, kPa, inHg, mmHg, ozin2, inH2O, ftH2O, cmH2O, kgcm2. Hold data, record, (Software
& Cable Optional).
Same as above but
with Operating Pressure 0~+2psi, Max. Pressure : 20psi. 5 Selectable
units : bar, mbar, psi, mmh2O, inH2O. |
|
|
Display : 18mm (0.7) LCD.Max.
indication +1999. Range : 200MW, 2000MW, 20W, 200W, 2000W, 20KW. Zero Adjustment : External adjustment
for zero value of the display. Sampling Time : Approx. 0.4 sec.
Operatig Temperature : 0o~50oC (32o~122oF). Opeating Hmidity : Less than 80% R.
H. Power Supply : AC 110V, +15%,
50 / 60Hz or AC 220V / 240V, +15%, 50 / 60 Hz. Power Consumption : Less than 2VA. Dimension : 160 x 120
x 85 mm, with housing front cover. Features : LSI circuit provides
High Accuracy, Reliability & Durability. *Built-in over input
indiccation. *DC battery operated. |
|
LSKC-608 GRAIN MOISTURE
METER
GRAIN : Paddy, Rice, Corn, Wheat.
Display : 4 digit,10mm LCD. Range : Moisture Content : 8~20%,
Temp. : -10~65oC. Accuracy : Moisture : +1%,
Temp. : +0.8. Resolution : 0.1. Operating Temperature : 0~50oC or 32~122oF. Operating Humidity : < 0.8.
Battery : 4x1.5AA (um-3). Size : 178 x 68 x 39mm. Weight : 190g (not including
measuring probe and batteries). |
|
MC-6012 WOOD MOISTURE METER Data Hold. 4 LCD Display. Range :
0~50% Accuracy : +(0.5% +1). Temperature Range : 10oC~80oC Accuracy : +0.8oC. |
|
|
HATCO EM-2G WOOD MOISTURE INDICATOR Display : 2 x 10
LED. Measurement Scope - Range I : 7 - 15%. Range II : 16 - 35%. Accuracy :
+1 place. Working Volt. : DC 9V. BOSSTEK MD-4G WOOD MOISTURE INDICATOR All same as EM-2G
but with 4 PIN. |
|
|
Measure Moisture content over range 9% to 30%.
Microprocessor circuit assures maximum possible accuracy, provides special functions
and features. Records maximum and minimum reading with recall. Data hold
function to freeze the desired value on display. Auto shut off saves battery
life. RS-232 PC serial interface. Built in low battery indicator. Seperate
pin type moisture probe, easy operation and remote measurement. Display :
13mm (0.5) LCD. Application : For surveying buildings for dampness and for
the rapid determination of moisture content of wood/timber. Memory : 9
Material species groups in memory, calibrations for about 150 different
varities of wood are provided. Circuit : Custom one chip of micro processor
LSI circuit. |
|
|
|
|
New Portable Weather Station. A
simple Hand Hel meter monitoring : Wind Speed : KNT, BF, FPM, MS KMH. Temperature
: Cel, Farenheit, -15~50oC (5~122oF), Windchill (WCL), Relative
Humidity : 0~100%RH, Dew Point (DP), Heat index (HI), Barometric Pressure
(BAR) : hpa (mbar) 400~1100 and inHg (11.8~32.5), Upcoming Storms : 0,-2h, -4h,
-8h, -16h bar chart shows the developemtn of air pressure over the last 16
hours, forecast future weather, Altitude (ALT) : Meter and Feet. Built in
Alarm Function . Sealed precison thermistor and humidity sensor. Battery Low
Indicator. Altitude Function and Specification : Range -600~1880Meter |
|
|
4 IN 1 PROFESSIONAL
MEASURING INSTRUMENT Anemometer, Humidity, Light Meter & Thermometer.
|
|
|||||||
|
Measurement |
Range |
Accuracy |
Resolution |
Measurement |
Range |
Accuracy |
Resolution |
|
|
Air Velocity |
80 ~ 5910 ft/min |
<20m/s : +3% F.S. >20m/s : +4% F.S. |
1 ft/min |
Humidity |
10 ~ 95% RH |
<70%RH : +4%RH >70%RH : +4%rdg |
0.1% RH |
|
|
0.4 ~ 30.0 m/s |
0.1 m/s |
|||||||
|
1.4 ~ 108.0 km/h |
0.1 km/h |
|||||||
|
0.9 ~ 67.0 mile/h |
0.1 mile/h |
32 ~ 122 oF |
+2.5oF |
0.1 oF |
||||
|
0.8 ~ 58.3 knots |
0.1 knots |
0 ~ 50oC |
+1.2 oC |
0.1 oC |
||||
|
32 ~ 122 oF |
+2.5 oF |
0.1 oF |
Light |
0~20,000 Lux |
+5% rdg +8 dgt |
1 Lux |
||
|
0 ~ 50oC |
+1.2 oC |
0.1 oC |
0~2,000 Fc |
1 Ft-cd |
||||
|
Temp. (Type K) |
-148~2375oF |
+(1% rdg + 2oF) |
0.1 oF |
Temp. (Type K) |
-100~1300oC |
+(1% rdg
+ 1oC) |
0.1 oC |
|
|
Model |
DT 8820 (4 IN 1) |
DT 21 (5 IN 1) |
|||
|
Appearance |
|
|
|||
|
FUNCTION |
Measuring Range |
Basic Accuracy |
Measuring Range |
Basic Accuracy |
|
|
Temperature |
-20oC ~ 750oc -4oF ~ 1400oF |
+3% +2oC +3.0% +3oF |
-20oC ~ 200oC -20oC ~1300oC |
+3.0% +3oC |
|
|
LUX |
20, 200, 2000, 2000 (2000 x 10 Lux) |
+5% +10 Digit |
200, 2000 ( x 10 Lux) |
+4% +3 Digit |
|
|
HUMIDITY |
25% ~ 95% RH |
+5%RH at 25oC |
25% ~ 95% RH |
+5% +3 Digit |
|
|
Sound Level (Frequency
Weighting : A, C) |
Lo (Low) 35 ~ 100dB Hi (High) 65 ~ 130dB |
+1.5dB at 94dB sound level, 1kHz sine wave |
35 ~ 100dB |
+5% +3 Digit |
|
|
M U L T I M E T E R |
DCV (V) |
|
200m, 20, 600 |
+0.5% +2 Digit |
|
|
ACV (V) |
200, 600 |
+1.2% +10 Digit |
|||
|
DCA (A) |
200u 200m 10 |
+1.0% +2 Digit +1.2% +2 Digit +3.0% +2 Digit |
|||
|
OHM (W) |
200, 2k, 200k 2M |
+0.8% +3 Digit +1.0% +2 Digit |
|||
|
Transistor Test |
0-100hFE of PNP or NPN
transistors Vce approx. 2.8VDC, Base Current
approx. 10m A |
||||
|
Diode Check |
Test Current 1.4mA; Open circuit
voltage 2.8V |
||||
|
Continuity Check |
Threshold 50 W, Continuity Beeper 2.5kHz |
||||
|
SPECIAL FUNCTION |
3˝ digit LCD display with
function indication Auto Power off, Data Hold and Max
Hold |
3˝ digit LCD display with
function indication Built-in Sensors for Lighting,
Humidity and Sound Level |
|||
MULTIMETER
|
|
|
|
|
|
PROTEK-A803 ANALOG MULTIMETER
26 Range Bench Type
Tester. 30KW / VDC, 10KW / VAC. Transistor
Check. Temperature Test.
DCV : 0 ~ 0.6 / 3 / 12 / 60 / 300 / 1000V, +3%. ACV : 0~12 / 30 / 120
/ 300 / 1000V, +4%. DC Current : 0 ~ 120mA / 3mA / 30mA /
300mA / 10A, +3%. Resistance : 0 ~ 50MW, +3 arc.
Battery Test : Good or Replace for 1.5V AA and 9V. Continuity : Buzzer
Sound. |
|
|
PROTEK-260TR ANALOG MULTIMETER 20,000W / VDC. 20 Ranges Compact Size Tester. Transistor Check. DCV : 2.5 / 10 / 50
/ 250 / 1000V. ACV : 10 / 50 / 250 / 1000V. DC Current : 2.5 /
25 / 250mA, 10A. Resistance : 0~20mW, +3oarc. Decibels : -10dB ~
62dB. |
|
PROTEK-HC5050E ANALOG MULTIMETER
AC / DC Volts : 0 ~
1200V. DC Current : 0 ~ 12A within +2.5% full scale, all ranges. AC
Current : 0 ~ 12A within +3.5% full scale, AC 12A range on
Separate Jack. DC Resistance : 0 ~ 1000MW, +3 rc.
Scale Length : 4˝. Batteries : 2 x 1.5V A.A pencil and 9V. |
|
VC8045. 4˝ TABLE DIGITAL MULTIMETER WITH TRUE RMS
DCV : 200mV / 2V / 200V / 100V +(0.05%+3d). ACV : 200mV / 2V / 20V / 200V / 700V +(0.08%+15d). DCA : 20mA / 200mA / 20A +(0.6%+5d). ACA : 20mA / 200mA / 20A +(0.6%+5d). Ohms : 200 / 2K / 20K / 200K / 2M /
2mW +(0.1% +2d). Frequency : 20KHz / 200KHz : +(1.5%+10d)
Diode, Buzzer. |
|
|
4.˝ Digits Bargraph
20,000 count LCD fully featured Programmable True-RMS DMM CE mark Certified. Measuring Range :
1000VDC, 750VAC. Current : 10Amp DC/AC. Resistance : 2MW, Capacitance : 40mF. Frequency : 200
Khz, Temp. : -40°C~+1370°C, Crest Factor for True-RMS (45Hz~1khz), Compare function
GO-NO GO tests, Max / Min average recording, continuity audible. Surge (Transient)
Voltage Protection. Adjustable relative
reference level using the front panel buttons. |
|
215 True RMS MULTIMETER
|
|
|
4.˝ Digit LCD display with 40,000
count bargraph Auto Ranging. Measuring range DC / AC Voltage 400mV
- 1000V in 5 ranges, DC / AC Current : 400mA-10A in 2 ranges, Resistence : 400
- 40MW in 6 ranges Capacitance : 9.999nF - 99.99nF in 3
ranges, Frequency : 199.99 kHz in 3 ranges, Relative Humidity : 5-95% in 3
ranges, Temperature : - 200° ~ +1370°C, -356° ~ +2489°F with 4 temperature measuring T1 / T2
/ T3 / T1-T2, with Diode check. Countinuity check Buzzer sound, Data
hold, Relative mode, Min. / Max. recording all
measurement, Auto Power-Off. |
|
|
|
DT-930FD Digital Multimeter
4.˝ Digit LCD display. (Range /
Accuracy / Resolution) DCV : 1000V / +0.2% of rdg +5
digits / 100mV. ACV : 700V / +1.0% of rdg +15
digits / 100mV. DC Current : 10A / +2.0% of
rdg +10 digits / 1mA. AC Current : 10A / +2.0% of rdg +10digits /
1mA. Resistance : 20MW / +1.0% of rdg +5 digits / 1kW. Capacitance : 20mF / +2.5% of rdg +10 digits / 1nF. Transistor hFE Test : hFE - Display
read approx hFE value (0 - 1000) of transistor under test (ALL TYPES). Test Condition -
Base Current approx. 10mA Vce approx 3V. Audio Frequency
Test : 10Hz - 20kHz / +1% of rdg +5 digits. / 1Hz Sensitivity -
50mV rms. Maximum Display :
19999 counts with automatic polarity indication. |
|
|
BOSSTEK 4000P POCKET DIGITAL
MULTIMETER
4.˝ digit (Auto + Manual Range) 400Mv
~ 500. DCV : +(0.5%rdg+3). 400mV ~
500 ACV : +(1.0%rdg+3). Ohms : 400W ~ 400MW +(0.5%rdg+3). Capacitance : 4nF ~ 200mF (3%rdg+5). Frequency : 99.99Hz ~ 9.999MHz (0.02%
rdg+2). Diode test with Buzzer. |
|
|
|
- 503 DMM
|
|
|
3.˝ Digit with Range Hold and Auto
OFF features. DCV : 300mV / 3 / 30 / 300 / 1000V (Input Impedance 10MW) +0.5%rdg +2dgt (300mV), +1%rdg
+2dgt (3 / 30 / 300V), +1%rdg +4dgt (1000V). ACV : 3 /
30 / 300 / 750V (Input Impedance 10MW) +1.2%rdg +4dgt. DCA : 300 / 3000mA / 30 / 300mA / 10A +1.5%rdg+2dgt
(300mA / 30mA), +2%rdg +2dgt
(3000mA / 300mA / 10A). ACA : 300 /
3000mA / 30 / 300mA / 10A +2%rdg
+5dgt (300 / 3000mA / 30 / 300mA) +2.5%rdg
+5dgt (10A). Ohms : 300W / 3 / 30 / 300kW / 3 / 30MW +1%rdg +2dgt (300W / 3 / 30 / 300kW), +2%rdg +2dgt (3MW), +3.5%rdg +2dgt (30MW). Diode Test : 2V Release Voltage : Approx. 1.3V. Continuity buzzer
: 300W (Buzzer sounds below 20W). Power Source : R6P (AA) (1.5V) x 2. |
|
FUKE DT 9201-A
3.˝ Digit Jumping Display. DC Voltage
Range : 1000V. AC Voltage Range upto
750V, Resistance 2000MW, AC / DC Amp 20A,
Capcitance 2mF to 20mF with HFE Testing. |
|
MIC-7S 3.˝ Digit. Voltage
: 200mV-1000VDC 5 Ranges, 200mV-750VAC, Resistance : 200-20MW in 6 Ranges, Diode Check.
MIC-6E 3.˝ Digit. Measurement
Ranges DC Voltage 200mv-1000V, 5 Ranges, AC200mv-750 Resistance 200-20MW 6 Ranges, Current 200m / 10 Amp AC / DC, Diode
and Audiable continuity check with Temparature Measurement. MIC-6000Z 3.˝ Digit Measuring ranges voltage 200mV-1000V DC, 200mV-750V AC RMS Current 20ľA-10A DC, 2mA-10A AC, Resistance 200W -20mW, RMS, diode, Audible / Visual continuity check. |
|
TES 2104 3.˝ Digit Measuring range 1000V DC in 5 Ranges 750V AC in 5 ranges DC / AC Current 10A, Resistance 20 MW in 6 Ranges contunity Buzzer check and Diode Check. |
WENS-9215. Auto Ranging 3.˝ Digit Measuring range voltage DC
200mV-2V-20V-200V-1000V, AC 2V-20V-200V-750V, DC Current 200mA - 20A,
Resistance : 200-2K-20K-200KW, Diode test, Continuity Buzzer Sound, Data hold. |
FUKE DT-830B 3.˝ Digit Measuring Range Voltage :
DC 200mV - 1000V. Voltage AC : 200V - 750V. Current DC 200mA-10A. Resistance 200W - 2000KW. Accuracy : 0.5%
with Transistor and Diode Test. Maximum Display : 1999. |
|
|
FUKE DT-890B
3.˝ Digit DCV=200m / 2 / 20 / 200V +(0.5%
of rdg + 1 digit), 1000V +(0.8% of rdg + 2 digits). ACV = 2 / 20 / 200V +(0.8% of
rdg + 3 digits), 200m / 700V +(1.2% of rdg +3 digits). DCA = 2 / 20mA +(0.8% of rdg + 1 digit), 200mA +(1.2% of rdg
+ 1 digits), 10A +(2% of rdg + 5 digits). ACA = 2 / 20mA +(1% of rdg + 3 digits), 200mA +(1.8% of rdg 3
digits), 10A + (3% of rdg + 3 digits). W = 200W + (0.8% of
rdg + 3 digits), 2K / 20K / 200K / 2MW + (0.8% of rdg +1 digit), 20MW + (1.0% of rdg + 2 digits), 200MW + [5% of rdg (-10 digits) + 10 digits]. C = 2000P / 20n / 200n / 2m / 20mF +(0.25% of rdg + 3 digits). hFE = 0~1000. Diode Test, Test
Current 1.0mA, Test Voltage : 2.8V. Equal to MECO 603. |
|
DM-301 HUNG CHANG make 3.˝ Digit Measurement Ranges Voltage 1000VDC in 5 Ranges, Voltage 750VAC in 2 Ranges, DC current 200mA-10A in 6 Ranges, Resistance 2000KW in 5 Ranges. Diode check. |
|
HC-6020A HUNG CHANG make 3.˝ Digit with Large LCD Measuring Range 200mV-1000VDC / 200mV-750V AC, Current AC / DC 200mA-20A. Resistance 200W -20MW Diode Test, Continuity Check Buzzer Sound. |