WENS 700 / 700S ALL IN ONE Handheld
Instrument
OSCILLOSCOPE - MULTIMETER -
FREQUENCY COUNTER - FUNCTION DIGITAL STORAGE
OSCILLOSCOPE – Input Channel : Ch1. Frequency Bandwidth : DC ~ 5MHz. Sampling Rate : 25MSPS. Rising Time : less than 15ns. Input Impedance : 1 MegW. Input Protection : 600V pp Max. Vertical Sensitivity : 10mV/div- 200V/div(14div). Trigger : Auto,
Normal. Scope Probe : (1:1). Multimeter
- TRUE
RMS. DC Voltage : Range : 400mV - 1000V. Accuracy : 0.% + 10d. AC Voltage (TRUE RMS) : 400MV - 700V. Accuracy : 0.75% + 10d at 50-500Hz / 2.0% + 10d at 500-30KHz. DC Current : Range : 400mA - 20A. Accuracy : 1.2% +10d. AC Current (TRUE RMS) : 400mA - 20A. Accuracy : 1.2% + 10d at 50-500Hz / 2.0% + 10d at 500-30KHz. Resistance : Range : 400W - 40mW. Accuracy : 400W - 4MW 0.5% + 10d / 40MW 1.0% + 10d. Diode Test : Accuracy : 2%.
Continuity : Less than 60W, Buzzer Sound. Capacitance : Range : 40nF-100uF. Accuracy : 2.0%. Frequency :
Range : 1Hz-5MHz 0.1%. Frequency
Counter – Range : 1Hz - 1.3GHz. Display : 8 digits. Period measurement :
5Hz - 100MHz. Internal Gate Time : 0.1s, 1s, 10s. Input Sensitivity : 100mV
RMS. Simultaneous display in one screen : Frequency, Period, rpm. FUNCTION
GENERATOR – Output : Triangle, Sine, Square wave. Range : 2Hz-5MHz 6 Range. Display : 3 digits. Output Impedance : 600W 10%.
Amplitude : 2V - 10V p-p. Duty Cycle Adjustment : 25% - 75%. Simultaneous
display in 1 screen : Frequency, Duty, Amplitude. |
WENS – 700
WENS – 700S |
||
|
Comparison
(wens 700 / 700s) : In
addition to Oscillosope / Multimeter / Logic Analyzer. |
|||
|
Model |
WENS 700S |
WENS700 |
|
|
Frequency Counter |
Digital
(1Hz-1.3GHz) Multiple Measurements |
4 Digit
(0.5Hz - 45MHz : 0.1% Accuracy) |
|
|
Function Generator |
3 Digit
(5MHz max) Sine, Square, Triangle
wave Multiple Measurements |
78KHz
Max (Fine Adjustable) Square
wave only |
|
|
Automotive Analyzer |
None |
RPM
(0-12,000) 1/2/4/5/6/8/12 Cylinders Duty %,
Dwell degree ms/Pulse width |
|
|
Optional Accessories
: Temp. Adaptor,
Automative Inductive Pickup, Scope Probe (bnc 1:1), Counter / Generator
Probe. |
|||
|
C & C 1030
Oscilloscope Frequency Bandwidth : DC to 30MHz, 2CH Dual Trace. 6” Ractangular CRT with internal graticule.
Sensitivity 1mV / dv. ALT. Triggering function (Vert Mode). CH2 Polarity
inversion switch. High sensitivity X-Y mode. Sweep magnification (X10). TV
sync. separator circuit for stable TV signal observation. |
|
|
BOSSTEK ST-16B
Oscilloscope Frequency Bandwidth : 3dB DC to 10MHz. High Sensitivity vertical Reflection
Factor-10mV/DIV. Horizontal Sweep Factor - 0.1S to 0.1uS DIV. Triger
Synchronization INT, EXT, TV. Sweep mode AUTO, TRIGGER. |
|
