S

SATMETER / SMOKE ALARMS / SOLDER – DESOLDER / STOP WATCH / SWEEP FUNCTION GENERATOR

SOUND LEVEL METER / SOUND CALIBRATOR

 

SATMETER

 SM-01 SATMETER

 

Hand held portable satellite SIGNAL STRENGTH METER, Analog type, to measure LNB Voltage 25VDC, Current 500mA, Buzzer for Acoustic Signal Strength, Frequency : 900-2050MHz, LED indicate for Horizontale or Vertical Polorisation, Built in NiCad rechargeable battery  pack for powering LNB.

SMOKE ALARMS

Model

LX98A-D

HWG-2000

HWS-3000A

HWS-3000B

APPEARANCE

Sensor Type

Photoelectric

Dual Channel Ionization

Operating Voltage

DC 9V

AC 220V

DC 9V

Working Temp.

-5oC ~ 40oC

-4oC ~ 40oC

4oC ~ 38Oc

4oC ~ 38oC

Humidity Range

10% ~ 90% RH

Audio Alarm

85db (3m)

Alarming point

2% smoke

Output

 

Relay, Potential free

SOLDERING / DESOLDERING STATION / SOLDER POT

1-100 BASIC SOLDERING TIP

Iroda Make iron plated size 1.0 m/m conical  type for delicate work.

 

 

1-210 BASIC SOLDERING TIP

Iroda Make iron plated size 2. 0 m/m diagonal type.

 

 

GH-35 Battery Operated Dual Function

Instant Heat Soldering Iron and Flash Light.
Operating Time : Approx. 30 min. continuous use with new battery. Approx. Temp. Soldering Tip : 9W (max.) / 450oC (840oF). Time to Reach Operating Temp. : 185oC(365oF) in 12 seconds. Approx. Nos. of  Solder Joints Intermittently : 160 Joints / Using New Batteries. Tip : Long Life, Iron-Plated, Anti-Corrosion. Battery : 3nos. 1.5V Alkaline AA. Super bright flashlight. Use to solder & de-solder  micro to medium sized parts.

JIE LA HUA 936 SOLDERING STATION

Temperature Range      ----------    200oC~480oC (392oF~896oF)                        Soldering Iron         ----------    907ESD

Power Consumption     ----------    60W                                                                    Heating Element    ----------    Ceramic Heater

Output Voltage                ----------    24V AC
COSO CS-98 SOLDERING STATION

Temperature Range     -------------------------------------     200oC - 450oC (392oF - 842oF)

Power Consumption    -------------------------------------     45W at 350oC

Heating Element           -------------------------------------     98-H Ceramic Heater

Soldering Iron                -------------------------------------     CS98-I

Standard Tip                  -------------------------------------     900M-T-B

 

 
COSO CS-88 DE-SOLDERING STATION

De-soldering Iron          -------------------------------------     JF88-G

Power Consumption    -------------------------------------     45W at 350oC

Heating Element           -------------------------------------     88-H Ceramic heater

Temperature Range     -------------------------------------     200oC - 450oC (392oF - 842oF)

Standard Tip                  -------------------------------------     900M-T-B

POT-100 SOLDER POT

 

Power Rating : 140W. Line Volt. : 220VAC 50Hz.

Temp. Setting  Range (oC) : 180oC~430oC (356oF~806oF).

Solder Bath Dimension (mm) : f36mm.

Solder Bath Depth  (mm) : 30mm.

Melted Solder (KG) : 0.3kg.

No-load (KG) : 0.6kg.

External Dimensions (mm) : 160 x 90 x 80 mm.

SLD-850 SMD REWORK STATION

 

• For easy QFP desodering and soldering.

• Air volume and temperature adjustable.

• Electrostatic-proof design, very safe to components.

• One minute auto-cooling after power off.

• Various FP pickup and nozzles for different kinds of IC (optional).

Technical Specificaton :

Station : 20W, diaphragm air pump, capacity 23L/min (max.). Dimension : 187 x 135 x 245mm. Handle Unit : AC 110V / 220V, 250W, 100oC ~ 420oC hot air wire length 196mm. Replacement Parts : Various heating elements, nozzles.

STOP WATCH

T-113 ELECTRONIC MULTI TIMER AND STOP WATCH

 

• 10 Digits display plus two extra digit for weekday or mode display. • Normal Time : Hour, Minute, Second, Month, Day and Weekday.
• Selectable 12/24 Hr. Cycle. • Selectable hourly chime.

• Selectable daily or schedule alarm (30 second alarm).

• Count-down timer with count-up function (max range 23 : 59’59” and 30 second alarm).

• Chronograph with split function (max range 23’59”59”).

• Key-on tone. • Battery operated with 1.5V AAA Battery.

• Contemporary sporty housing design for hand held and desktop.

SWEEP FUNCTION GENERATOR

 -7202 SWEEP FUNCTION GENERATOR

 

4 in 1 Sweep, Function and pulse Generator. Versatile wave forms for Sine, Triangle, Ramp, Pulse, Sawtooth and DC Outputs. 0.02Hz-2 MHz Frequenc. Output in7 Range. Built in 6 Digit Internal and External Counter Display (10MHz). Internal and External linear Sweep Control from  1:1 to 100:1. Low distor tion for Sine waveform less than 1% at 10Hz to 100kHz. Variable Symmetry for generating Saw tooth and Pulse waveforms. TTL and CMOS leveled Square wave form output. Variable DC Offset control. Variable Output level control with 20dB Attenuator and Amplitude control.

SOUND LEVEL METER / SOUND CALIBRATOR
 SL-4010 SOUND LEVEL METER

 

3.½  Digit 18mm (0.7”) LCD. Range : 30 ~ 130 dB, 3 ranges. 1st Range - 30 ~ 80dB,

2nd Range - 50 ~ 100dB, 3rd Range - 80 ~ 130dB, 50dB on each step,

with over and under range indicating. Resolution : 0.1dB.

Accuracy : 23 + 5oC. Frequency : 31.5Hz ~ 8,000Hz.

 SL-4001 SOUND LEVEL METER

 

Display : 3.½ Digit 18mm (0.7”) LCD. Function : Db (A & C frequency weighting),

Time weighting (Fast, Slow), Max. hold, AC and DC output. Measurement Range : 3 ranges,

35 ~ 130 dB (Typical 30dB ~ 130dB), input signal only. Resolution : 0.1 dB.

Accuracy : 23 + 5oC. Frequency : 31.5Hz ~ 8,000Hz.

 SL-4011 SOUND LEVEL METER

 

Same as above with Complete carrying case and RS-232 Communication.

 SL-4013 SOUND LEVEL METER

 

Separate Sound Probe for Easy Operation.

All same as SL-4010 but with 5 Digit LCD Display. RS-232 and Auto Range.

 SL-4022 CLASS ‘A’ SOUND LEVEL METER

 

Measurement Ranges : 3 Ranges (30~70dB, 60~100dB, 90~130dB).
Resolution : 0.1dB. Accuracy (23 +5oC) : Time weighting and frequency weighting meet IEC 651 type 1, calibrating input signal on 94dB (31.5Hz ~ 8kHz), the accuracy of A weighting is specified as follows : (1) 31.5Hz ~ +1.5dB, 63Hz ~ +1.5dB, 125Hz ~ +1dB. (2) 250Hz ~ +1dB, 500Hz ~ +1dB, 1kHz ~ +1dB. (3) 2kHz ~ +1dB, 4kHz ~ +1dB, 8kHz ~ +1.5dB to -3dB). Size of Microphone : 1/2 inch standard size.

Model

AZ - 8921

AZ - 8925

AZ - 8928

 

APPEARANCE

Accuracy / Resolution

+ 1.5 dB / 0.1 dB

+ 2 dB / 0.1 dB

A/C Weighting & Auto Power Off

Yes

Backlight

No

Yes

No

Power Check & Data Hold

Yes

Hard Carrying Case

Yes

No

Auto Range

Yes

No

Digital Display & Tripod Mountable

Yes

Fast / Slow response

Yes

Max. Hold & Max. Min. Average

Yes

Range (min ~ max)

30 dB ~ 130dB

40 dB ~ 130dB
CB-2050 ANALOG SOUND LEVEL METER. A & C Weighting

 

Fast and Slow Response. Accuracy : +2dB@114dB. Standard : 0dB = 0.0002 mbar. Microphone : Electric Condenser omnidirectional becoming slightly directional with increase in frequency. Distortion : Less than 2% at 1KHz, 0.5-Volt. Switch Setting (Range of Measurement) : 60dB (50-66dB), 70dB (60-76dB), 80dB (70-86dB), 90dB (80-96dB), 100dB (90-106dB), 110dB (100-116dB), 120dB (110-126dB).

YF-20 ANALOG SOUND LEVEL METER

 

Ranges : Low - 40 ~ 80dBA, Hi - 80~120dBA. Current : 5mA (Operating). Consumption : 14mA (BATT test). Size : 160 x 65 x 38mm.

SOUND CALIBRATOR
 SC 941 SOUND CALIBRATOR

 

Sound Pressure level : 94Db 0.8 dB, Frequency : 1000Hz + 5%.

Calibration available for the type of ½ inch Microphone.