S
|
AREA SENSORS – PAN SERIES & PAS SERIES SESNSORS CONTROLLER / PROXIMITY
SENSOR
PHOTO SENSOR – PN / PE / PU
/ PR / PS / PY FIBRE SENSOR – PF SERIES / PG SERIES FIBRE OPTIC SENSOR & CABLE |
|
Series |
Model |
Sensing Method |
Sensing Distane |
Number
of optical
axis |
Sensing Range |
Sensing object |
Type |
PAN20-T££N |
|
PAN 20 |
PAN20-T08 |
Through
Beam |
7m |
8 EA |
140mm |
Opaque Object Of Over f 32 32mm |
|
|
|
PAN20-T12 |
12 EA |
220mm |
||||||
|
PAN20-T16 |
16 EA |
300mm |
||||||
|
PAN20-T20 |
20 EA |
380mm |
||||||
|
PAN20-T24 |
24 EA |
460mm |
Sensing Method |
Through
Beam |
||||
|
PAN20-T28 |
28 EA |
540mm |
Optical axis pitch |
20 mm |
||||
|
PAN20-T32 |
32 EA |
620mm |
Rated voltage |
12 ~
24V DC +10% (Ripple P-P +10%) |
||||
|
PAN20-T36 |
36 EA |
700mm |
Current Consumption |
Max.
170mA |
||||
|
PAN20-T40 |
40 EA |
780mm |
||||||
|
PAN20-T44 |
44 EA |
860mm |
Control output |
NPN
open collector output – Load current : Max. 100mA Load
voltage : Max. 30V DC Residual voltage : Max. 1V |
||||
|
PAN20-T48 |
48 EA |
940mm |
||||||
|
|
Operating mode |
Trns : M/S display : Red LED, Power display : LED, Operation display
: Red |
||||||
|
Rcvr. : E1 display : Green LED, E2 display : Red, Light on Stability display : Green LED, Operation display : Red LED |
||||||||
|
Case protection |
IP66 |
Response time |
Max.
15ms |
|||||
|
Material |
Case :
Aluminimum, Window : acryl, Lens : acryl |
Light source |
Infrared
emitting diode (Wave length 950mm) |
|||||
|
Protection function |
Preventing mutual interference function when installing
in parallel (MS/MODE) Output protection function |
Operating S/W |
A/O S/W
Operation (only for Rcvr.) M/S S/W Operation (only for Trns.) |
|||||
|
TYPE |
Appearance |
PAS-T8N |
PAS-T12N |
PAS-T16N |
PAS-T20N |
|
Sensing Method |
|
Through
Beam |
|||
|
Sensing Distance / Object |
5m / Opaque
object of over f30mm |
||||
|
Optical Axis Pitch |
20 mm |
||||
|
Number of Optical Axis |
8 |
12 |
16 |
20 |
|
|
Sensing Range |
90 mm |
100 mm |
110 mm |
120 mm |
|
|
Rated Voltage |
12~24V
DC (Ripple Max. +10%) |
||||
|
Current Consumption |
Max. 90
mA |
Max. 100mA |
Max. 110mA |
Max. 120mA |
|
|
Control output |
NPN open
collector output-Load current : Max. 100mA, Load voltage
: Max. 30V DC,,Residual Voltage : Max. 1V |
||||
|
Operating mode |
All Beams,
Light ON : On operation (More
than 1 Beam, Dark ON : OFF Operation) |
||||
|
Response time |
Below
7ms |
||||
|
Light Source |
Infrared
emittig diode (Wave length 850 mm) |
||||
|
Point angle |
within
+5o (At over 2 m sensing distance) |
||||
|
Operating Indicator |
Trns :
M/s display : Red LED, Power display : LED, Operating display : Red, Rcvr : E1 display : Green LED, E2 display : Red, Light on stability
display : Green LED, Operating display : Red LED |
||||
|
Case Protection / Material |
IP40 /
Case : ABS, Window : acryl |
||||
|
Protection Function |
Auto compensation
sensitivity function, [Preventing mutual interference function when installing
in parallel] protecting short circuit of output function |
||||
Model
|
HPA - C7 |
HPA - CT7 |
HPA - C7W |
APPEARANCE
|
|
|
|
(mm)
|
80(W) x 80(H) x 32(D)
|
||
Function
|
Multi purpose |
Timer function |
Two sensors connectable |
Power Voltage
|
85 - 264VAC, 50/60Hz
|
||
Power Consumption
|
Approx. 5VA
|
||
Power supply to sensor
|
12VDC, +10%
200mA
|
||
Connectable sensor
|
NPN transistor output or relay output sensor |
||
Output
|
* Relay contact : 1c (250VAC 3A
Resistive load) Rated electrical life : over
100,000 operation * NPN Transistor output (open collector) Max. sink current : 100mA, Applied Voltage : DC 30V Max. |
* Relay contact
:
1c (2outs seperately) (250VAC 3A, resistive load)
Rated electrical life : over 100,000 operations |
|
Response time
|
Relay contact : Approx. 100mA, Open collector :
5mS Max. |
10ms
|
|
|
|
j |
k |
l |
m |
n |
j |
k |
l |
m |
n |
|
HYP |
8 |
R |
1.5/2 |
P/N |
HYP |
18 |
R/L |
5/8 |
P/N |
|
|
HYP |
12 |
R |
2/4 |
P/N |
HYP |
30 |
R |
10 |
P/N |
|
|
HYP |
18 |
S |
5/8 |
P/N |
HYP |
30 |
S |
10/15 |
P/N |
|
|
HYP |
25 |
S |
5/8/12 |
P/N |
HYP |
40 |
S |
20 |
P/N |
|
|
HYP |
18 |
L |
5/8 |
A |
HYP |
25 |
S |
5/8 |
A |
|
|
HYP |
30 |
R |
10/15 |
A |
HYP |
30 |
S |
10/15 |
A |
|
|
|
|
|
|
|
HYP |
40 |
S |
20 |
A |
|
|
HCP |
18 |
R |
8 |
N/P |
HCP |
30 |
R |
15 |
N/P |
|
|
HCP |
18 |
RP |
8 |
N/P |
HCP |
30 |
RP |
15 |
N/P |
|
JAI - INDUCTIVE PROXIMITY SENSORS Generates high frequency alternating field at the active face by the
oscillator circuit. When any metal is brought into the field it causes
oscillation to stop. hence the demodulated voltage feeding the trigger
disappears. DIA 8mm - 50mm, Sensing Distance : 1 - 25mm, DC & AC 2/3/4
Wire, 10-30 V DC & 90-230V AC, PNP/NPN NO/NC NO+NC, LOAD CURRENT UPTO
500mA MAX. JAI - CAPACITIVE PROXIMITY SENSORS
Serves as a contactless sensors for positioning,
monitoring and detecting all types of material. DIA 18MM - 30MM, Sensing Distance
: 8 - 15mm, Sensitivity Adjustment Provided : 10-30 VDC 3/4 WIRE, PNP/NPN
NO/NC NO+NC, LOAD CURRENT UPTO 500mA MAX.
|
|
Model |
PN - T3 |
PN - R02 |
PN-M1 |
|
APPEARANCE |
|
|
|
|
Type |
Through
beam |
Diffuse
reflection |
Retro
reflection |
|
Sensing Distance (mm) |
3m |
20cm |
1m |
|
Power Voltage |
12-24VDC
+10% |
||
|
Operating mode |
Dark :
ON |
Light :
ON |
Dark :
ON |
|
Current consumption |
Max.
45mA |
Max. 40Ma |
|
|
Output rating |
NPN
voltage, current output (Sink current : Max. 100mA) |
||
|
Model |
PE - T5D |
PE - R05D |
PE - M3D |
|
APPEARANCE |
|
|
|
Type
|
Through
beam |
Diffuse
reflection |
Retro
reflection |
|
Sensing Distance (mm) |
5m |
50cm |
3m |
|
Power Voltage |
AC/DC 24V ~ 240V +10% (50 / 60Hz) |
||
|
Power consumption |
Trns:Max.
0.7W, Rcvr:Max. 1.2W |
Max. 2W |
Max.
1.6W |
|
Operating mode |
Dark :
ON |
Light :
ON |
Dark :
ON |
Output rating
|
Relay output 1C 250VAC 2A (Non inductive) |
||
|
MODEL |
PU-30 |
PU-30S
|
PU-50 |
PU-50S
|
|
APPEARANCE |
|
|
||
Sensing Distance
|
30mm |
50mm |
||
|
Detection Object |
Over f 2mm (Substance) |
Over f 0.4mm (Substance) |
Over f 1.5mm (Substance) |
Over f 0.6mm (Substance) |
|
Power Voltage |
12-24VDC +10% |
|||
|
Current Consumption |
Max. 30mA |
|||
|
Operating Mode |
Selectable Light On / Dark On for reverse Polarity |
|||
|
Output Rating |
NPN : Load voltage Max. 300VDC, Load Current : Max. 180mA, Residual voltage : Max. 2V |
|||
|
Light Source |
Infrared LED (Modulated) |
|||
|
LED Indicators |
Output : Red LED, Power : Green LED |
|||
|
Sensitive Control |
--- |
Control Volume |
--- |
Control Volume |
|
Material Case / Range |
Zn /
Polycarbonate |
|||
|
Connection |
Flying
lead |
|||
|
Case Protection |
IP65 (IEC) |
|||
|
Model |
PR-T10NC |
PR-R300NC |
PR-M1NC |
APPEARANCE
|
|
|
|
|
Type |
Through
beam |
Diffuse
reflection |
Retro
reflection |
|
Sensing Distance (mm) |
10m |
300mm |
1m |
|
Power Voltage |
12-24VDC
+10% |
||
|
Operating mode |
Light :
ON / Dark : ON Selectable |
||
|
Current consumption |
Tcvr : Max. 20mA Rcvr :
Max. 15mA |
Max.
35mA |
|
|
Output rating |
NPN
voltage, Max. 30V DC, Load current : Max. 200 ,mA, current voltage : Max. 1 V |
||
TYPE
|
Through Beam
|
Diffuse Reflection |
Convergent Beam |
Distance Convergent Beam |
Retro Reflection |
|||
MODEL
|
PS-T1N |
PS-T7N |
PS-T10RN |
PS-R40RN |
PS-Z4N |
PS-D5RN |
PS-M2RN |
|
APPEARANCE
|
|
|
|
|||||
|
Measuring Distance |
1m |
7m |
10m |
400mm |
1 ~
40mm |
10 ~
50mm |
0.1 ~
2m |
|
|
Min. Sensing Object |
f 6mm |
Whine & non glossy paper
200x200mm |
Whine & non glossy paper
100x100mm |
Whine & non glossy paper 50 x
50mm |
f 20mm |
|||
|
Power Voltage |
12-24VDC
+10% |
|||||||
|
Current |
Trns (Max.) |
23mA |
20mA |
23mA |
25mA |
23mA |
30mA |
23mA |
|
Consumption |
Rcvr (Max.) |
20mA |
||||||
|
Output |
Control |
NPN open
collector output, load voltage : Max. 30VDC, Resistive load : 100mA, Residual
voltage : Max. 1V |
||||||
|
Operating |
Stability |
NPN open colletor output,
load voltage : Max. 30VDC, Resistive load : Max. 50mA, Residual voltage :
Max. 1V |
||||||
|
Output mode |
Light
On / Dark On selection by switch Volume built-in type |
|||||||
|
Light Source |
Infrared
emitting diode |
Red
emitting diode |
Infrared
emitting diode |
Red
emitting diode |
||||
|
Operating Indicators |
Control output indicator : Red LED, stability output indicator :
Green LED (Infrared LED of emitting part for through beam type is power
indicator |
|||||||
|
Connection |
Flying
lead NPN 4P f 3 mm, length 2m |
|||||||
|
Case Protection |
IP67
Structure |
|||||||
|
MODEL |
NPN Output type |
PNP Output type |
||
|
PY-T3N-D |
PY-T3N-L |
PY-T3P-D |
PY-T3P-L |
|
|
PY-TL3 (Trns), PY-TR3N-D (Rcvr.) |
PY-TL3 (Trns), PY-TR3N-L (Rcvr.) |
PY-TL3 (Trns), PY-TR3P-D (Rcvr.) |
PY-TL3 (Trns), PY-TR3P-L (Rcvr.) |
|
|
APPEARANCE |
|
|||
|
Sensing
Distance / Object |
3m /
Opaque object of over (Min. f5mm) |
|||
Power Voltage
|
12 ~ 24V DC +10% (Ripple Max. +10%) |
|||
|
Output |
• Load voltage : Max. 30V DC • Load Current : Max.100mA • Residual Voltage
: Max. 1V. • NPN open collector output. • Stability output
Current : Max 50Ma |
• PNP open
collector output • Load Current : Max. 100mA • Residual voltage
: Min. (Rating voltage - 20V) |
||
|
Operating Method |
Dark ON |
Light
ON |
Dark ON |
Light
ON |
|
Light Source |
Infrared
emitting diode |
|||
|
Indicator |
Trns : Power
indicate (Red LED), Rcvr : Operating indicate (Red LED), Stability indicate
(Green LED) |
|||
|
Case Protection |
IP 67
(IEC Standard) |
|||
|
Material / Cable |
Lens
case : PC / Trns : f3mm, 2P, Rcvr. : f3mm, eP
(NPN:4P), Cable length : 2m |
|||
|
MODEL |
DIGITAL MULTI CONTROL
TYPE (NPN) |
||
|
PFD-RGN (Mediocrity) |
PFD-RMN (Multi
function) |
||
|
APPEARANCE |
|
||
|
Power Voltage |
12-24VDC
+10% |
||
|
Current Consumption |
Max. 30
mA |
||
|
Output |
Open
collector output, 100 mA (Supplied voltage Max. 30V, Residual voltage Max.
0.5V) |
||
|
External Input |
Teaching
/ Autoteaching |
Teaching
/ Autoteaching / Reset Input |
|
|
Multi Function |
Counter |
- - |
400
cps, Up/Down, 0 ~ 9999 |
|
RPM |
- - |
Monitoring
speed output, 12 ~ 9999 rpm |
|
|
Output type |
• Light
On / Dark On • Normal output,
On Delay, Off Delay, ON/Off Delay |
||
|
ON / OFF Delay |
0 ~
9999 ms |
||
|
Light Source / wavelength |
Red
emitting diode / 660nm |
||
|
Sensitivity Setting |
Auto-teaching,
Manual |
||
|
Additional Function |
Brightness
control 180o Turning Indication, Display
time set, zero reset, Initial reset, Lock function |
||
|
Connection |
For DIN
Rail attachment Flying lead 1.5m (5 Pin) |
||
|
MODEL |
PG – TR |
PG – TAR |
FIBRE OPTIC CABLE for PG-3R
|
||
|
(RED LUMINESCENCE) |
Model
|
GR - 620 |
GT - 420 |
||
|
APPEARANCE |
|
APPEARANCE
|
|
||
|
Power Supply |
12-24VDC
+10% (Current consumption : Max 40mA) |
Length
|
2m |
||
|
Current Consumption |
Max.
40mA |
Diameter |
1mmf |
||
|
Operating mode (O-Mode) |
Light
ON / Dark ON switchable |
Min. Detactable Object |
1mmf |
||
|
Timer Mode (T-Mode) Timer Mode (T-Mode) |
|
NOR-Normal Mode, OND-ON Delay Mode OFD-OFF Delay Mode OSD-One Short Delay Mode |
Ambient Temp. |
-30~+70oC |
|
|
Sensing Distance (Max.) |
55mm |
150mm |
|||
|
Output rating |
NPN
Voltage Output (Max.
30VDC) |
|
|
|
|
|
Light source |
Red LED
(Modulated) |
||||
|
|
Model No. |
LX-16C
|
|
Power |
AC180 ~ AC240V 50/60Hz |
|
|
Detection Distance |
2 ~ 11m (Adjustable) |
|
|
Detecting Range |
180o |
|
|
Rated Load |
1200W (220 VAC Max.) |
|
|
Working Temp. |
-20o ~ 40oC |
|
|
Working Humidity |
<93% RH |
|
|
Time - delay |
5sec ~ 7min +2min |
|
|
Ambient Light |
<10 ~ 2000 Lux (Adjustable) |
|
|
Installation Height |
1.8m ~
2.5m |
|
Model No. |
LA -150G |
|
|
Power |
AC100V
~ AC240V 50/60Hz |
|
|
Detecting Range |
12 Meter, 160o (25oC) |
|
|
Sensor Head Adj. |
Vertical & Horizontal movable. |
|
|
Delay Time |
5 Sec., 30 Sec., 1Min., 3Min.,
5Min., 15Min. |
|
|
PIR Activated Lux |
24Hrs, Faint, Night
(Selectable) |
|
|
Warm-up |
Light on about 60 Secs. for initial powered |
|
|
Max. Load |
10A |
|
|
Water Proof |
IP54 |
|
|
Size |
76 x
105 x 124mm (W x D x H) |
|
|
Model No. |
LA-360HP
|
|
Power |
AC110V ~ AC240V 50/60Hz |
|
|
Detector |
3D digitized PIR |
|
|
Max. Load |
10A |
|
|
PIR Lens Size |
1.7cm |
|
|
Detecting Range |
6~8 meter at 25oC |
|
|
Detecting Angle |
160o (Horizontal) / 360o
(Vertical) |
|
|
PIR Partition |
80 Sector |
|
|
Delay Time |
5 Sec., 30 Sec., 1Min., 3Min.,
5Min., 15Min. |
|
|
PIR Activated Lux |
24 Hrs.
Faint, Night (Selectable) |
|
|
Warm-up |
Light
on about 60 Secs. for initial powered |
|
|
Size |
120mm f x 48mm
H |
|
Model No. |
LC-151A |
|
|
Power |
AC100V
~ AC240V 50/60Hz |
|
|
Detecting Range |
12 Meter, 160o (25oC) |
|
|
Sensor Head Adj. |
Vertical & Horizontal movable. |
|
|
Delay Time |
5 Sec., 30 Sec., 1Min., 3Min.,
5Min., 15Min. |
|
|
PIR Activated Lux |
24Hrs, Faint, Night
(Selectable) |
|
|
Warm-up |
Light on about 60 Secs. for
initial powered |
|
|
Max. Load |
10A |
|
|
Water Proof |
IP54 |
|
|
Lamp |
200W /
250W Halogen |
|
|
Size |
76 x 105
x 124mm (W x D x H) |
|
|
Power Cord |
1 Meter
w/ Plug, Stainless Screw |
|
Option
|
N.O. /
N.C. contact and Stainless Support |
|
|
Model No. |
LC-502A
|
|
Power |
AC100V ~ AC240V 50/60Hz |
|
|
Double Sensor |
Head Detectable Angle : 320oC (160oC for each Head) |
|
|
Detectable Range |
12M, Sensor Head Rotatory Angle: 270oC
Horizontally,210o Vertically(Upward 30o) |
|
|
Installation Height |
1.8 M~5.0 M |
|
|
Delay Time |
5 Sec., 30 Sec., 1Min., 3Min.,
5Min., 15Min. |
|
|
Activated Lux Level |
24Hrs, Faint, Night
(Selectable) |
|
|
Warm-up |
Lamp lights on for less 60
Sec. then start working. |
|
|
Max. Load |
10A |
|
|
Working Temp. |
-20oC ~ 60oC |
|
|
RFI Interference |
20V/M
10~1000MHz |
|
|
Lamp |
300W
Halogen |
|
|
Water Proof Class |
IP44 |
|
|
Alarm Signal Output |
N.O. or
N.C. output (Accept Client Order) |
|
|
Power Cord |
1 Meter
long w/ Plug |
|
|
Size |
18.6 x
16.8 x 22.5cm (W x D x H) |
|
|
SYP-UVT-46 series are optimized for the UV
regions, which requires special fabrication process. The spectral response is
selective for ultraviolet radiation only. These detectors have a sharp
responsibility cut off at about 365nm (UV-A) and 320nm (UV-B), thereby
eliminating filter requirements. These photo-detectors are designed to fit
for small size applications using TO-46 package in hermetically sealed with
UV transparent window, but other options are also available. These
photo-detectors have been designed to operate at high speeds in the photovoltaic
mode and require no external power supply. SY-UV-SMD series GaN-based UV detector is superior to other UV detectors in the
sensivility, reliability and the conversion efficiency because Gan UV
detector is solar blind and has excellent thermal and chemically stability. Features : • Fabricated
using a Gallium-based III-V materials system. • Visible Blind. • No filters
required. • Low Profile. |
|
|
SYP-UVT46 |
SY-UV-SMD |
|
Parameter |
SYP-UVT46A |
SYP-UVT46B |
SY-UV-SMDA |
SY-UV-SMDB |
Spectral Range
|
200 ~
365 nm |
250 ~
320 nm |
200 ~
365 nm |
250 ~
320 nm |
|
Responsivity (@ lP) |
0.13
(typ.) |
0.07
(typ.) |
> 0.1A/W
@ 340 nm |
> 0.1A/W
@ 305 nm |
Active Area
|
19.6 x
102 |
0.076mm2 |
||
|
Response Speed |
1MHz |
2MHz |
||
|
Dark Current |
<5nA |
<20nA |
0-1nA |
|
|
Package |
TO-46 |
SMD |
||
|
Operating
Temperature |
-20oC ~ +85oC |
-20oC ~ +80oC |
||
|
Storage Temperature |
-20oC ~ +90oC |
-40oC ~ +85oC |
||
|
Junction Capacitance |
25 |
|
||
|
Reverse Voltage |
|
-2V |
||
|
Max.
Spectral Sensitivity |
345nm |
|||