T

TACHOMETER / LINE SPEED METER / CONTACT & NON CONTACT / TELESCOPIC - ANTENA / BRUSH

 

TACHOMETER


Model

RF3-SNB

SM-3

APPEARANCE

Dimension

96(W) x 48(H) x 112(D)

Power Supply

100 ~ 240VAC + 10% (50 / 60Hz)

Signal Input Voltage

Voltage Input (D.C. input) [H] level 5~30VDC, [L] level 0~2VDC

Measurement Range

1 ~ 99999 rpm

1 ~99999rpm (m/min)

Measurement

7 kinds of operating MODE

RPM Speed (m/min) Cycle (10ms - 1min) Time difference (10ms ~ 1min)

Time Width Length Interval

Free Scaling

M x 10-n - 10-5 ~ 9999 M : 1~9999 n : 0~5 (M, n : Integers)

Decimal Point

Selectable, Fixed (by Dip s/w)

Model

RF3-TNA

RF4-TNB

APPEARANCE

Dimension

96(W) x 48(H) x 112(D)

96(W) x 48(H) x 104(D)

Power Supply

AC 100 ~ 240V + 10% (50 / 60Hz)

Signal Input Voltage

ON : 4~30VDC / OFF : 0~3VDC

ON : 4~30VDC / OFF : 0~2VDC

Measurement Range

1 ~ 99999 rpm

Low Speed : 1 ~ 30 cps (1 ~ 1800 rpm)

Measurement

Mode 1 (rpm)

Free Scaling

1/10 , 1/60, 1/100

Decimal Point

Moving, Appointment (by Dip s/w)


DIGITAL TACHOMETER and LINE SPEED METER


Model

Model TACHOMETER (dhc6J-z)

LINE SPEED meter (DHC6J-X)

APPEARANCE

COUNTING SPEED

1000 rps / 60000Rpm

Display Digit

0.56inch LED (6 digit)

Power Supply

AC/DC 100~240V

INPUT SIGNAL

Contact or Solid State [H] : 4~30V [L] : 0~2V Input >4.7kW

PANEL CUT OUT

45(H) x 92(W)mm

DIMENSION

48(H) x 96(W) x 112(D)mm


CONTACT & NON-CONTACT TACHOMETER


TACHOMETER FUJI Make Model H Analog type range 10000 RPM with attachments.


BOSSTEK DT-2235B CONTACT TYPE TACHOMETERS WITH LINE SPEED ADAPTER

 

Measuring Ranges : 5-19,999RPM, 0.05-1,999.9 m/min (0.2-6,560 ft/min).

Resolution : 0.1 RPM (<1000 RPM), 1.0 RPM (>1000 RPM). Accuracy : +0.05% + 1 dgt.


DT-2234B TECHOMETER DIGITAL PHOTO TYPE

 

Micro-computer circuit design, 5 digits, 0.4 LCD with function announciation, Range : 5 to 100,000 RPM, Resolution : 0.1RPM accuracy:0.05%, Sampling Time : 1 second. Memory Call last max. / min. value stored, Detecting distance : 50 -150mm. Time Base:Quartz-Crystal.


 

BOSSTEK DT-2234B ALL SAME AS ABOVE but CHINA make

 


 

HATCO DT-2234C ALL SAME AS ABOVE but with LASER SIGHTING.

 


BOSSTEK DT-2238A PHOTO TECHOMETER BOSSTEK make

 

5 Digit, 10mm LCD Display. Range : 2.5-99999 RPM. Resolution : 0.1RPM (<1000RPM),

1.0RPM (>1000RPM). Accuracy : +0.05% of rdg +1dgt. Sampling Time : 1Sec.

Detecting Distance : 12 to 40 inch.


TA-601 TACHOMETER ADAPTOR

 

Digital Non-Contact type 2 Range 100-20000 RPM can be operated with a digital Multimeter having Measuring Range 200mVDC.


TES RM-1500 DIGITAL TACHOMETER

 

5 Digits LCD display. Light Reflex Measurement. Range 10.00 to 99,999 RPM. Measuring Distance 50 to 300mm. Event counter with elapsed time. Max./Min./Hold : True Average. Auto Range RPM. Contact RPM and circumferential velocity measurements in one simple adaptor. Display : 5 digits 99999 counts. sampling rate : 0.7 second (> 60rpm) >1 second (10 to 60RPM). Measuring Distance : 50 to 300mm.Range Selection : Automatic.

 


 

TES RM-1502 optional Contact Adaptor for TES RM-1500.


DT-2236 TECHOMETER DIGITAL PHOTO / CONTACT TYPE

 

2 in 1, Micro-computer circuit design, 5 digits, 0.4 LCD with function announciation,

Range Photo Techometer 0.5~99,999 RPM, Contact Techometer 0.5~19,999 RPM

(Surface speed -0.05~1,999.9 m / min., 0.2~6, 560 ft / min.),

Memory Call last max. / min. value stored.

 


 

BOSSTEK DT-2236 ALL SAME AS ABOVE but CHINA make


TM-4000K TACHOMETER DIGITAL, Data Hold / Contact / Non-Contact

 

6 Digit LCD Display, Range 30 ~ 30,000 RPM, Resolution 0.1 RPM, Auto power off after 2 minutes with memory. Accuracy : 0.01%.W

 


 

TM-5000K TACHOMETER DIGITAL

 

All same as above but Range : 6 ~ 99999.9rpm.


DT-2237 GASOLINE ENGINE TACHOMETER

 

High precision gasoline engine RPM measurement, clamp the Inductive Pick Up sensor to the high tension wire. Measured Cycle : 4 cycle - 2, 3, 4, 5, 6, 8, 10, 12.. 2 cycle - 1, 2, 3, 4.. (No matter what cylinder it is for both the cycle). Reading Range : 10~50,000RPM. Resolution : 1RPM. Accuracy (23+5oC) : +(0.05% + 1dgt). Signal Sensor : RPM inductive pick up sensor. Signal Sensing Principle : Secondary Tach. measuring method, no matter what cylinders is.


DT-2239A DIGITAL STROBOSCOPE TACHOMETER

 

MICRO PROCESSOR Circuit, High Accuracy, Bright and Compact, 4 Digit LED Display 100-10000 FPM / RPM, Sampling Time 1sec.


DT-2259 TACHOMETER / STROBOSCOPE

 

2 in 1 Exclusive one-chip design microprocessor LSI circuit with LCD display 5 digits, 10mm. PHOTOTACHOMETER : 5~99,999RPM with 0.1RPM Resolution (<1,000RPM) 1RPM (>1,000RPM). Distance 50~150mm/2 to max. 300mm depending upon ambient light.

 

STROBOSCOPE : 100 to 100,000 FRM/RPM, with Flash Adjust Range. Resolution : 0.1 FPM / RPM
(Less than 1,000 FPM/RPM) 0.1 FPM/RPM (Over 1,000 FPM/RPM). Flash Tube Colour : Orange LED.


DT-2269 STROBOSCOPE

 

6 Digit LED Display with RS-232 and Push Button Adjustment.

Flash Rate : 5~15000 RPM / FPM, Resolution : 0.1RPM / FPM - < 1000 RPM / FPM and

1 RPM / FPM - > 1000 RPM / FPM. Phase : +360o and equvilant ms. Resolution : Degree : 1o, 0.1ms < 1000 RPM and 0.01ms > 1000RPM. Accuracy : + (0.05% + 1d). Switch Select Function : RPM, Delay time, Fine adjust, Coarse adjust, Multiply by 2, Divide by 2, Range adjust, memory recall. FLASH TUBE SPECIFICATION - Flast tube : Xenon lamp. Flash Duration : Approx. 60 ~ 1,000 microseconds. Flash Colour : Xenon white 6,500 o K.


DT-6236B PHOTO/CONTACT, TOUCH & 2 IN 1 TACHOMETER. (TOUCH TYPE)

5 Digit LCD Display. Microcomputer technology is used for fast and accurate measurement.
Memory button recalls the last, mimimum and maximum values during measuring period.
Wide measuring range, high resolution. Auto Zero Adjustment. Streaming plastic casing, compact design. Measuring Ranges : Photo / Laser : 2.5 ~ 99,999 RPM, Contact : 0.05 ~ 1,999.9 m / min (0.2 ~ 6,560 ft min). Measuring Distance : 50 ~ 500mm. Resolution : 0.1 RPM (<1000RPM) 1.0 RPM (>1000RPM).
Accuracy : +0.05% + 1dgt. Sampling Time : 0.5 sec. (over 120RPM), Battery : 1.5V x 4, AA size. Accessories : reflecting trips, rubber wheel and cone tip. Eexternal

(Optional - AC / DC adaptor ).


TELESCOPIC ANTENA


AT-20 Telescopic Antenna for RF pick-up with BNC connector.


JAI - TELESCOPIC BRUSHES AND INSERT BRUSHES


BRUSHERS

i) SK - 4

ii) TSK 6/16

iii) TSN 6/16

iv) TSL 6/16 X 30

v) TSL 6/16 X 40

vi) TSL 6/16 X 50

vii) TSL 6/16 X 60

viii) TSL 6/16 X 70

ix) TSL 6/16 X 80

x) TSL 6/16 X 90

xi) TSL 6/16 X 100

 

i) TSN 8

ii) TSL 8 X 30

iii) TSL 8 X 40

iv) TSL 8 X 50

v) TSL 8 X 60

vi) TSL 8 X 70

vii) TSL 8 X 80

viii) TSL 8 X 90

ix) TSL 8 X 100

INSERT BRUSHERS

i) SK - 4E

ii) TSK 6/16E

iii) TSN 6/16E

iv) TSL 6/16 X 30E

v) TSL 6/16 X 40E

vi) TSL 6/16 X 50E

vii) TSL 6/16 X 60E

viii) TSL 6/16 X 70E

ix) TSL 6/16 X 80E

x) TSL 6/16 X 90E

xi) TSL 6/16 X 100E

 

i) TSN 8E

ii) TSL 8 X 30E

iii) TSL 8 X 40E

iv) TSL 8 X 50E

v) TSL 8 X 60E

vi) TSL 8 X 70E

vii) TSL 8 X 80E

viii) TSL 8 X 90E

ix) TSL 8 X 100E